Online screw tightening machine

Function Introduction

Electronic setting of arbitrary values

●Multiple parameter settings

●Meet different process requirements

●Tightening data traceability query

●Visual positioning and detection function

●Equipped with a side mounted workbench

Tightening status monitoring display

Specification parameters

01 Torque+Angle Mode

①Hat recognition stage-During this stage,the tool runs at low speed to check if the screws and teeth fit smoothly;

②Spiral in stage-During this stage,the tool runs at high speed until it reaches the deceleration condition,and the torque feedback throughout the process is low with no significant changes;

③Tightening stage-Run the tool at low speed during this stage,set the target torque or target angle,and achieve the locking target.

02 Tightening process

A single screw can achieve multiple tightening processes, and its torque, angle, and speed can all be electronically set.

●Multiple screws can perform different torques, speeds, and angles.

03 Electronic Setting of Parameters for Various Projects

● Various screw tightening steps can be systematically set: tooth insertion step, screw in angle step, and tightening step.

04 Multi directional real-time monitoring data - traceable

●Real time display of tightening process data;

●Multi directional data monitoring,with traceable tightening results,product serial numbers,current status,and other data;

●Automatic data storage,real-time generation of data table files;

●Can be connected to MES system for data exchange.